top of page

Eye Hooks

  • Embossed Working Load Limit (WLL) on each hook

  • Forged Alloy or Carbon Steel

  • Available in Import or domestic brands.

  • 5 to 1 design factor based on the Working Load Limit (WLL)

  • Alloy Hooks have an "A" or "Alloy" Embossed on the hook.

  • Carbon Hooks have a "C" or "Carbon" Embossed on hook.

  • Hooks have a painted finish.

Eye Hook

Eye Self-Locking Hooks

  • 4 to 1 Design factor.

  • CARTEC Eye Type Self-Locking Hooks can be used safely up to a maximum of 20,000 cycles at or below the Working Load Limit (WLL).

  • Do not exceed operating loads (WLL).

  • Not suitable to be used in acid environments, highly corrosive with chemical substances, in explosive environments, or with a temperature higher than 380°C or lower than - 40°C.

  • Not suitable to lift personnel.

  • These hooks are intended for in-line lifting or straight pulls only.

Cartec Eye Type LOcking Hook.png

Swivel Self-Locking Hooks

  • Hooks will self-lock under load.

  • All brands have a latch kit release (trigger) at the back of the hook.

  • Available in Import, Crosby, Cartec, or Gunnebo brands.

  • 5 to 1 design factor based on the Working Load Limit (WLL)

  • Painted finish.

  • Swivels are designed for positioning only and not intended to rotate under load

  • Bearing Hooks available in some sizes (Crosby Brand).

  • Forged - Quenched & Tempered.

  • these hooks are intended for in-line lifting or pulling purposes only.

  • side puling/lifting could result in catastrophic failure.

  • Crosby© SHUR-LOC© can be used for lifting personnel lifting applications as they meet the intent if OSHA Rule 1926.1431 (g)(1)(i)(A) and 1926.1501(g)(4)(iv)(B).

Crosby S1326 Hook.png

Crosby

Cartec Swivel SelfLocking Hook.png

Cartec

VGD Swivel Locking Hook.jpg

VGD

Gunnebo Swivel Locking Hook.jpg

Gunnebo

Swivel Hooks

  • Embossed Working Load Limit (WLL) on each hook

  • Available in Import or domestic brands.

  • 5 to 1 design factor based on the Working Load Limit (WLL)

  • Painted finish.

  • Swivels are designed for positioning only and not intended to rotate under load

  • Bearing Hooks available in some sizes (Crosby Brand).

  • Forged - Quenched & Tempered.

Swivel Hook
bottom of page