top of page

Shoulder Machinery Eyebolts

  • Forged  Steel- Quenched & Tempered.

  • Available in sizes from 1/4" up to 2-1/2".

  • Metric sizes also available.

  • Made in USA (Gray Tools brand).

  • Working Load Limits are based on in-line pulling only.

  • Meets or exceeds the requirements of ASME B30.26

  • Self-Coloured and Galvanized finishes available.

  • May be used for lifting or hoisting.

Click image for specifications

RUD Lifting Point

  • Metric thread.

  • considerably higher WLL in comparison to DIN 580

  • clear marking of the minimum WLL

  • comprehensive range of threads

  • 4 to 1 design factor

  • Click image for more details

Rud Eyebolt.png

Regular and Shoulder Nut Eyebolts

  • Forged  Steel- Quenched & Tempered.

  • Available in sizes from 1/4" up to 1-1/2".

  • Import and Domestic brands available.

  • Working Load Limits are based on in-line pulling only.

  • Meets or exceeds the requirements of ASME B30.26

  • Hot Dip Galvanized finish.

  • NOT to be used for overhead lifting.

Regular
Shoulder

Load Rating Based on Angle of Pull

Direction of Pull                          Adjusted (WLL)

  (from in-line)                         Working Load Limit

   45 Degrees                             30% of rated WLL

   90 Degrees                             25% of rated WLL

Rod Clevises

  • C-1035, SA-122-F11, F22, Stainless Steel materials.

  • UNC/UNF Class 2B, Right Hand or Left Hand Thread.

  • Metric Threads also available.

  • Made in USA.

  • Pins sold separately.

  • Self-Coloured, Galvanized, Plated, and Stainless Steel finishes available.

Click image for specifications

Eyenuts

  • Forged  Carbon Steel - Quenched & Tempered.

  • Available in sizes from 1/4" up to 2".

  • Available in Domestic and Import.

  • Embossed WLL, Manufacturer, and Traceability Code.

  • Working Load Limits are based on in-line pulling only.

  • Meets or exceeds the requirements of ASME B30.26

  • Galvanized finish.

  • UNC Class 2 Right Hand Tapped.

Click image for specifications

Swivel Hoist Rings

Swivel hoist rings are ideal in situations where you need to make an angles lift. Ensure that the mounting screw is tightened to the torque specification indicated on the swivel hoist ring.

DO NOT exceed torque ratings applied to the bolt as this could compromise the swivel hoist ring.

DO NOT replace the existing bolt with another bolt.

  • Individually tested to 2-1/2 times the Working Load Limit. 

  • Available in sizes from 800lbs up to 100,000lbs.

  • Bolt specification is an alloy hex socket head cap screw to ASTM A 574.

  • Available in metric and imperial thread.

  • 360° swivel and 180° pivot action.

  • Yellow chromate finish for added corrosion protection.

  • Rated for overhead lifting.

  • 5 to 1 Design Factor.

  • Meets or exceeds all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. 

  • These hoist rings meet other critical performance requirements including fatigue life, impact properties, and material traceability. 

HR125.jpg

Click image for specifications

bottom of page